V2 SERIES
ArctikBlue® V2
Reliable condensate drainage for dairy cabinets with V2 intelligence
Built with reliability in mind, the ArctikBlue® V2 delivers performance in a robust stainless steel tray, with a gravity-fed drainage channel and integrated CondenSense® technology.
Pump Overview
- OrbiFlo® technology
- Dual voltage: 115-230v – 50/60Hz
- Alarm: Volt free, audio and LED
- Integrated with CondenSense® detection – X88-858
- Use for commercial supermarket fridges
- Alternative solution to central vacuum systems.
- Download datasheet here
ArctikBlue V2 Delivers
- Automatic self-priming and run-dry tolerance with soft start
activation. - CondenSense® intelligent flow adjustment with a condensate cycle memory for maximum efficiency.
- Compatible with signalling with most leading case controllers.
- Fluted drainage channel helps prevent bio-film build-up and condensate stagnation.
- Swap-out pump kits available for easy preventative maintenance
Performance
Max Flow:
50 L/Hour
Max Head:
20 Metres
Max Lift (N/A):
7 Metres
Volume level (Low flow):
19 dB(A)
Volume level (High level):
21 dB(A)
Alarm Type:
Volt free, Audio & LED
Unit size
Max A/C KW:
50 KW
Consumption (Rated)
Voltage:
115-230V
Frequency:
50/60Hz
Draw (A):
0.03 (115V), 0.06 (240V)
Power (W):
5.5W
Power (VA):
5.7VA
Power Factor:
0.96
IP Rating:
IPX4
Product sizing (L x W x H)
Dimensions:
337 x 457 x 65mm
Weight:
4.2 kg
Inlet:
40mm ID push fit
Outlet:
9.5mm, 12.7mm OD barbed
Alarm lead and power cable:
2 Metres
Tank capacity:
4.1 Litres
Pump on/off:
330ml
Alarm on vol:
3600ml
Performance
Max Flow:
13.2 G/Hour
Max Head:
66.5 Feet
Max Lift (N/A):
23 Feet
Volume level (Low flow):
19 dB(A)
Volume level (High flow):
21 dB(A)
Alarm Type:
Volt free, Audio & LED
Unit size
Max A/C BTU:
170,000 BTU
Consumption (Rated)
Voltage:
115-230V
Frequency:
50/60Hz
Draw (A):
0.13 (115V), 0.06 (230V)
Power (W):
5.5W
Power (VA):
5.7VA
Power Factor:
0.96
IP Rating:
IPX4
Sizing (L x W x H)
Dimensions:
13.3 x 18.0 x 2.56"
Weight:
22.5 oz
Inlet:
1.57" ID push fit
Outlet:
3/8", 1/2" Barbed
Alarm Lead and power cable:
6.5 Feet
Tank capacity:
1.08 Gallons
Pump on/off:
11.16 fl oz
Alarm on vol:
121.7 fl oz
Tested performance
The graph presents flow, head, and lift performance for the ArctikBlue V2 operating conditions, showing how each parameter which may vary depending on conditions and thickness of liquid.
Regularly trusted by engineers worldwide, the ArctikBlue V2 has earned a reputation for durability and reliability, significantly reducing the need for call-outs and regular maintenance.
All pumps must be installed by a qualified engineer/ HVACR Technician
Tested performance
The graph presents flow, head, and lift performance for the ArctikBlue V2 operating conditions, showing how each parameter which may vary depending on conditions and thickness of liquid.
Regularly trusted by engineers worldwide, the ArctikBlue V2 has earned a reputation for durability and reliability, significantly reducing the need for call-outs and regular maintenance.
All pumps must be installed by a qualified engineer/ HVACR Technician
Discharge Pipe
Vertical (V):
Horizontal (H):
20 Metres
0 Metres
17 Metres
9 Metres
14 Metres
18 Metres
11 Metres
27 Metres
9 Metres
33 Metres
6 Metres
42 Metres
3 Metres
51 Metres
0 Metres
60 Metres
Unit Size
Max KW Unit:
50KW
Unit Type:
Fridge
Note: The ArctikBlue V2’s maximum head (20m) is NOT reduced or effected by suction lift (7m). Once installed, suction lift and discharge head should be considered independently. Ideal for small air conditioning units.
For each metre not used on vertical head you can run 3m on the horizontal.
- A heavy load on the pump will reduce the flow rate over greater distances.
- Performance is for guide only. It is the ultimate responsibility of the end user to ensure pump is fit for purpose.
Discharge Pipe
Vertical (V):
Horizontal (H):
65.5 Feet
0 Feet
56 Feet
30 Feet
46 Feet
60 Feet
36 Feet
88.5 Feet
30 Feet
108 Feet
20 Feet
138 Feet
10 Feet
168 Feet
0 Feet
200 Feet
Unit Size
Max KW Unit:
170,000 BTU
Unit Type:
Fridge
Note: The ArctikBlue V2’s maximum head (66.5ft) is NOT reduced or effected by suction lift (23ft). Once installed, suction lift and discharge head should be considered independently. Ideal for small air conditioning units.
For each metre not used on vertical head you can run 10FT on the horizontal.
- A heavy load on the pump will reduce the flow rate over greater distances.
- Performance is for guide only. It is the ultimate responsibility of the end user to ensure pump is fit for purpose.
| Pump purchasing options | Part No. | Available in |
|---|---|---|
| ArctikBlue® V2 with CondenSense® detection | X88-858 |
Americas
|
| ArctikBlue® V2 Swap-out kit | X88-860 |
Americas
|
New alarm system with dynamic monitoring
The FSA (Fail Safe Alarm) and HLA (High Level Audio) functions have been combined into a single, enhanced alarm system package. V2 models now incorporate both features along with an LED indicator as standard, delivering a more streamlined and comprehensive solution.
This product has been independently tested and certified by ETL (Electrical Testing Laboratories) Intertek (part of Intertek an independent lab) to meet recognised safety standards. Visit compliance website here.
Plenum spaces circulate air in buildings, often for HVAC systems. “Plenum-rated” materials limit smoke and toxic fumes in a fire, helping prevent their spread through the building.
V2 NEW INTELLIGENT FEATURES
Seamless, thick-gauge steel tray
Using thick-gauge stainless steel, the seamless tray is built for the demands of commercial refrigeration. Its robust construction ensures long-term durability, while universal fridge fittings simplify installation.
CondenSense® integration
Updated sensor technology with an integrated CS2 microchip provides automatic flow adjustment and smooth pump start-up for improved efficiency. The pump and sensor also learn from previous duty cycles to optimise performance.
Discreet, low profile
With a 65mm low-profile design and operation from as low as 19 dB(A), the ArctikBlue V2 can be installed discreetly beneath refrigeration cabinets without taking up unnecessary floor space or creating unwanted noise.
OrbiFlo® Technology
- Self-priming, valve-free operation
- Excellent dry-run tolerance
- Clog-resistant design
- Handles bio-films and suspended solids
- Smooth, pulsation-free flow
- Reinforced membrane with robust spine
- Operates in any orientation
V2 SERIES Features explained
See how the V2 delivers intelligent condensate removal solutions for multiple industries
Related Products
Part of the V2 Series - Comes with
Ducting kit with CondenSense® Reservoir Sensor
Part No : X88-835
Part of the V2 Series - Comes with
CondenSense® Reservoir Sensor
Part No : X88-721
Part of the V2 Series - Comes with
Slim fasica kit with CondenSense® Reservoir Sensor
Part No : X88-011
PRODUCT DOWNLOADS
CAD Model
Warranty
Keep track of your pumps
history and installation date for future reference (Optional).